Simple Guidelines in Installing Fiber Optic Cable
Step One In installing this certain cable to your home network setups, you need to lay out all the components of your network. Then, you need to locate them in their rooms of use. Now locate the hubs and switches close to the main computer on your network. Take your cable and use it to connect your computer and the wall outlet or satellite.
Step Two If your computer is cot completed with a fiber optic outlet, you can simply plug the cable into a media converter. This certain converter is able to switch back the form of the data from light into electricity. You can also run a USB or Ethernet cable from your media converter to your computer.
Step Three You can run your cables from your wireless router or from the hub and connect it with any additional workstation through the cable. If you can not find fiber optic input in your workstation, you can use media converter.
Step Four You can leave a light amount of slack in the table when you run them from a certain device to another. You can use ties instead of tape in coupling the cable together. Then, you can power on each component of the network. If it is necessary, you can also install some important software to support the performance.
It is quite easy, right? Now you can install your fiber optic cable in your system without any significant difficulty.