- Optical Tracer Patch Cord
- Fiber Optic Distribution Frame
- Fiber Optic Splice Closure
- Fiber Optic Termination Box
- Fiber Optic Patch Cord
- Fiber Optic Cable
- Fiber Optic Converter
- Fiber Optic Passive Parts
How to Set Up Your New Surround Sound to a High
Here are a few steps to get you started in the right direction.
First you need a good home theatre receiver. Good audio equipment is a must. Either buy a ready made package that has the receiver and the surrounds, or alternatively you can buy both the speakers and the receiver on their own.
Next you need to make a digital connection from the TV to the receiver. You can do this either with a coax cable, an optical cable or a HDMI. Depending on which your receiver and your TV has, you will see which one you will need to use.
As a next step connect the TV to the receiver either by connecting the HDMI from your sat receiver (or cable) to your home theatre HDMI and following that to connect another cable from the receiver's output to the TV or in case you're using a coax or optical cable, you can make the connection directly by using one cable from the TV.
Now you can set up your surround speakers. Make sure to properly measure the distance to each speaker so you have enough cable for all.
Once the cables are cut to proper size, you can now connect the speakers by connecting the receiver's + output terminal to the speaker's + input. Same with the negative (-) parts.
Finally now you are ready to switch the receiver to the audio input corresponding to where you have connected your TV. If you've done all the steps right, you're now ready to enjoy your new HDTV with the surround sound.